Snap-On Face Shields & Visors - ATV - auto parts online store

SNAP-ON HELMET FACE SHIELDS AND VISORS Shields are made of distortion-free, shatter-resistant, optical-quality plastic with protective edge beading Choose Bubble Shield (smoke-tinted or clear) or Bubble Peak Helmet Visor (black, white, transparent smoke, blue or red) Shields and visors fit any helmet with 5 snaps Z-2.1 approved�conform to standards set by U.S. Standards Institute Code and meet the Federal "needle" test. Injection-molded plastic visors provide shade from sun and protection from mud and dust. Bubble shield works great for prevention of inner turbulence. Both shields and visors have adjustable snaps. Applications: All Makes All Models

LOADING RAMP KITS Kits include everything you need except the planks Now it's easier than ever to roll your bike or ATV onto a pickup bed Make your own ramps and save! Build your own custom loading ramps and roll heavy items into pickup bed or van almost effortlessly and with little lifting or back strain. Ramp capacities are approximately 1,400 lbs. a pair or 700 lbs. each based on use with common 2 x 8 (1-1/2" x 7-1/2" actual size) or 2 x 12 (1-1/2" x 11-1/4" actual size) fir plank. Use oak or maple for higher capacities. RAMP TOPS. Solid 3/16" thick plate steel. Predrilled one-piece top mounts to underside of plank with carriage bolts, nuts and washers. Drilling of plank required. Large tongue holds ramp on tailgate or trailer floor. Recessed diamond grid on tongue minimizes slippage when it's wet. Predrilled tongue accepts self-tapping, screw-in steel hold-down pins to help stabilize ramp and prevent movement and separation. Tailgate or trailer floor must be drilled to use pins. Attach adhesive rubber pad to underside of top to prevent marring and to reduce ramp movement. RAMP BOTTOMS. Heavy-duty black rubber bottom wraps around end of plank and secures with pull-out-resistant nails. Ensures no-bump loading/unloading. Ridges on both top and bottom minimize ramp slippage. TRACTION TRACKS. Approximately 6"W x 12"L metal tracks mount to planks with nails. Each track has more than 150 raised 1/8"H circular ridges that provide the traction edges needed to help prevent slippage in wet/muddy conditions. Kits include instructions, hardware and ways to determine proper plank length. Applications: All Makes All Models

V-BAR TIRE CHAINS V-bars attached to cross chain provide the pull and push power and extra traction to get you out of the tough spots! Chains will not slip between the lugs on tires Sold in pairs. Chains will fit either front or back tires (except where noted). Applications:2002-2004 Yamaha Grizzly Grizzly; 660; 4x4; Tire Size: 25x10x12,2000-2002 Yamaha Kodiak Ultamatic; Tire Size: 25x10x12,1998-2001 Yamaha Grizzly 4x4; Tire Size: 25x10x10,1998-2001 Yamaha YFM Models YFM; 600; 4x4; Tire Size: 25x10x10,2000-2002 Yamaha Big Bear 4x4; Tire Size: 25x10x12,2000-2002 Yamaha YFM Models YFM; 400; 4x4; Tire Size: 25x10x12,1993-1999 Yamaha Kodiak Rear Tire Size: 25x10x12,1993-1999 Yamaha YFM Models YFM; 400; Rear Tire Size: 25x10x12,1996-2000 Yamaha YFM Models YFM; 350; UBL; Tire Size: 25x12x9,1987-1991 Yamaha YFP Models YFP; 350U; Terra Pro; Tire Size: 24x11x9,1987-1999 Yamaha Big Bear 4x4; Rear Tire Size: 25x10x11,1987-1999 Yamaha YFM Models YFM; 350; 4x4; Rear Tire Size: 25x10x11,1992-1995 Yamaha YFM Models YFM; 350; ERT; Tire Size: 25x12x9,1987-1990 Yamaha YFM Models YFM; 350; ERT; Tire Size: 25x12x9,1985-1991 Yamaha YFM Models YFM; 250; Timberwolf; Tire Size: 25x12x9,1986-1987 Yamaha YFM Models YFM; 225; Moto 4; Tire Size: 24x13x9,2002 Suzuki Vinson 4x4; Tire Size: 25x10x12,2000-2001 Suzuki LTA Models LTA; 500; 4x4; Tire Size: 25x10x12,1998-2002 Suzuki LTF Models LTF; 500; 4x4; Tire Size: 25x10x12,1998-2002 Suzuki QuadRunner Tire Size: 25x10x12,2002 Suzuki Eiger 4x4; Tire Size: 25x10x12,2002 Suzuki QuadRunner 400; Quadrunner; 4x4; Tire Size: 25x10x12,1991-1998 Suzuki King Quad Tire Size: 25x10x12,1999-2002 Suzuki King Quad 4x4; Tire Size: 25x10x12,1999-2002 Suzuki LFT Models LTF; 300; 4x4; Tire Size: 25x10x12,1987-1989 Suzuki QuadRunner Tire Size: 25x12x9,1987-1989 Suzuki LT Models LT; 300; Tire Size: 25x12x9,1987-2001 Suzuki LT Models 4WD; Tire Size: 25x12x10,1991-1998 Suzuki LTF Models LTF; 280; X; Tire Size: 25x10x12,2001 Suzuki LTF Models LTF;250; Tire Size: 24x11x10,1987-2000 Suzuki QuadRunner Tire Size: 25x11x10,1987-2000 Suzuki LTF Models LTF; 250; Tire Size: 25x11x10,1985-1986 Suzuki QuadRunner Tire Size: 25x12x9,1985-1986 Suzuki LT Models LT; 250; Tire Size: 25x12x9,1986-1987 Suzuki LTF Models LTF; 230; Dualrange; Tire Size: 25x12x9,2000-2001 Polaris Sportsman 6x6; Tire Size: 25x11x10,2000-2001 Polaris 500 6x6; Tire Size: 25x11x10,1999-2001 Polaris Magnum 4x4; Tire Size: 25x11x10,1999-2001 Polaris 500 Tire Size: 25x11x10,1997 Polaris Xplorer Tire Size: 25x12x10,1997 Polaris 500 Tire Size: 25x12x10,1996-2002 Polaris Sportsman Tire Size: 25x11x10,1996-2002 Polaris 500 Tire Size: 25x11x10,2000 Polaris Xpedition Tire Size: 25x11x10,2000 Polaris 425 Tire Size: 25x11x10,1995-1998 Polaris Magnum 4x4; Tire Size: 25x12x10,1995-1998 Polaris 425 4x4; Tire Size: 25x12x10,1995-2002 Polaris Xplorer Tire Size: 25x11x10,1995-2002 Polaris 400 Models Tire Size: 25x11x10,2001-2002 Polaris Sportsman Tire Size: 25x12x10,2001-2002 Polaris 400 Models 4x4; Tire Size

CUSTOM-DESIGNED CHROME-PLATED HALOGEN BULLET MARKER LIGHTS WITH ADJUSTABLE VISOR Elongated bullet-style shape Clear, amber and red lenses for front or rear use Adjustable visor for various mounting positions Add a take-notice look to fairings, saddlebags, travel trunks, fenders or accent rails. Lights can be used as auxiliary turn signals, marker lights or running lights. Powerful one-piece 20-watt halogen bulb and multi-faceted reflector combine to produce brilliant lighting. Adjustable chromed bezel with molded-in visor rotates 360�. Bezel holds recessed lens and is secured to light housing with three set screws and an o-ring gasket. Light includes approx. 1/2" high chromed pedestal mount with removable 10mm threaded hollow mounting stud (to help hide wiring; drilling required for mounting or wiring). Includes long pigtail wiring and mounting hardware. Die-cast metal housing is approx. 3" long; 1-5/8" diam. body. For easy mounting to 1/2" or 5/8" diam. accent rails, order mounting blocks below. Applications: All Makes All Models

HAND IMPACT DRIVER AND BIT ONLY SETS Loosens frozen screws, nuts and bolts that can't be turned with screwdrivers or wrenches. Choose from 16-pc. Complete set or 13-pc. extra bit set. Reversible feature permits tightening. No air or electric power needed. A must for those "impossible" jobs like striker plates, motorcycle engine cases, body panels, etc. Easy to use?just attach bit to impact tool and pound with your hammer. Won't strip or damage threads. sets. Applications: All Makes All Models

PROTECTIVE CABIN ENCLOSURE Protect yourself against the wind, rain and cold when off-roading! For all 4-wheel ATVs Black powder-coated take-apart tubular steel frame and steel rod roof bars mount easily to front and rear luggage racks with included hardware. Durable 210-denier nylon cover is polyurethane coated to repel water and reinforced at seams and stress points. Sewn-in sleeves allow cover to be slipped onto frame during assembly. Doors with 2-pull no-rust nylon zippers allow fast, easy entry and closure. Doors can be rolled up�snap straps secure doors at top. 4 large clear windows for unrestricted visibility. Frame disassembles and can be stored anywhere. Applications: All Makes All Models, All Makes All Models, All Makes All Models