Hydraulic Lift - ATV - auto parts online store


    Hydraulic Lift Hydraulic Lift

    MOTORCYCLE/ATV HYDRAULIC LIFT 1,500-lb. capacity Heavy-duty 4-ton hydraulic jack safely lifts almost any cycle or ATV Professional-quality lift for home or shop Simplifies bike repairs. Effortless maneuvering�jack rolls easily anywhere on 4 casters. 13-1/4"W square load-bearing surface with rubber pads safely holds bike. Bike can be strapped down for added security (straps not included). 6 locking height positions: 5" minimum, 17" maximum. Heavy-duty steel with tough powder-coat finish. High-load steel casters. Anti-slip foot pedal. Collapses for compact storage. Jack handle included. Applications: All Makes All Models

    SKU: 47ZX8706R
    Price: Click the button below.


    Maintenance-free Sealed 12V Batteries Maintenance-free Sealed 12V Batteries

    MAINTENANCE-FREE SEALED 12-VOLT BATTERY Advance technology, design and materials are united to increase current flow and cold cranking power for fast, easy starts in all weather, all temperatures Battery is shipped ready to mount and use�no filling, no charging required Permanently sealed for use in any position Ends worries about acid spills! Ends need to check acid levels forever! Ends need to add water forever! This battery has the power required to meet or exceed even the heaviest demands! Cover and lower case container are made of impact-resistant polypropylene (strong, gas resistant, oil resistant). Cover and case are bonded together for extra strength and to prevent seepage and corrosion. Sealed terminal posts prevent acid leaks, reducing corrosion and extending battery/cable life. Battery is ready to use�it has been filled, permanently sealed and charged prior to shipment to you (the special internal plates and separators have absorbed all the acid during filling and activation). Battery can be charged like conventional batteries with your 1-amp or 1/2-amp charger. When not used, battery should be charged once a month. During long storage, battery should be charged with a battery maintainer (sold separately). Includes hardware to attach to existing battery cables plus charging/maintenance instructions. Limited 36-month warranty with a 12-month free replacement period (see details below). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. 36-MONTH (LIMITED) BATTERY WARRANTY! We will replace battery at no cost to original owner if battery fails to hold a charge during the free replacement period (12-month free replacement for maintenance-free sealed battery). After the free replacement period, we will replace the battery, charging a prorated amount since purchase, based on the current regular selling price. Battery should not be returned without writing to us in advance for instructions. Labor not included. OEM: Replaces OEM number. CAP: 10-hour ampere-hour capacity rating�AH(10H-R). CCA: Cold cranking amps (starting power) for fully-charged battery for 30 seconds at 0� F. (A) Front and top terminal mounts. (B) Some modification of hold-down may be required. (C) Top and front terminal mount only. Hold-down/battery tray may require modification. Battery must be rotated for correct polarity (terminal position). Applications:1980-1996 Harley-Davidson FLT Models 1340cc,1980-1996 Harley-Davidson FLHR Models 1340cc,1980-1996 Harley-Davidson FLH Models FLHT 1340cc

    SKU: 01ZX4525AF
    Price: Click the button below.


    Hydraulic Lift Hydraulic Lift

    MOTORCYCLE/ATV HYDRAULIC LIFT 1,500-lb. capacity Heavy-duty 4-ton hydraulic jack safely lifts almost any cycle or ATV Professional-quality lift for home or shop Simplifies bike repairs. Effortless maneuvering�jack rolls easily anywhere on 4 casters. 13-1/4"W square load-bearing surface with rubber pads safely holds bike. Bike can be strapped down for added security (straps not included). 6 locking height positions: 5" minimum, 17" maximum. Heavy-duty steel with tough powder-coat finish. High-load steel casters. Anti-slip foot pedal. Collapses for compact storage. Jack handle included. Applications: All Makes All Models, All Makes All Models

    SKU: 47ZX8706R
    Price: Click the button below.


    All Rite Products Rackbag Gun and Bow Covers All Rite Products Rackbag Gun and Bow Covers

    RACKBAG� GUN AND BOW COVERS Affordable, lightweight alternatives to hard cases Covers will protect your rifle/bow from dirt, mud and the weather Attach over the top of your single ATV rifle/bow rack, securing with hook/loop fasteners Completely covers gun/bow and rack. Full-length zipper allows instant retrieval of rifle/bow. Can be folded down under rack when not needed. Made of water-resistant plastic-backed 600-denier polyester with camouflage pattern. Applications: All Makes All Models, All Makes All Models

    SKU: 48ZX9288W
    Price: Click the button below.


    All Rite Products Rackbag Gun and Bow Covers All Rite Products Rackbag Gun and Bow Covers

    RACKBAG� GUN AND BOW COVERS Affordable, lightweight alternatives to hard cases Covers will protect your rifle/bow from dirt, mud and the weather Attach over the top of your single ATV rifle/bow rack, securing with hook/loop fasteners Completely covers gun/bow and rack. Full-length zipper allows instant retrieval of rifle/bow. Can be folded down under rack when not needed. Made of water-resistant plastic-backed 600-denier polyester with camouflage pattern. Applications: All Makes All Models, All Makes All Models, All Makes All Models

    SKU: 48ZX9288W
    Price: Click the button below.


    Folding Curved Loading Ramps Folding Curved Loading Ramps

    FOLDING CURVED LOADING RAMPS Patented camber design allows tractors, cycles and ATVs to maneuver easily over the tailgate Curved design also keeps wheels in contact with ramp surface at all times to eliminate back-wheel spin Available in steel or aluminum Solid surface is safe to walk on. There are no rungs to "catch" tires, possibly causing tractor to flip backwards. Ramps are 84" long opened and have a 12-1/4" wide raised no-skid loading surface. Approx. 7" long steel fingers secure ramps to tailgate. Stretch straps and drop-in holding-down pins are included to maximize ramp stability, prevent accidental separation and allow easy repositioning. Ramps fold down to 63-1/2" x 12-1/4" x 4" size for compact storage. Some assembly required. Include instructions. Steel Ramps. 2,000-lb. capacity per pair. Black powder-coated 14-gauge steel. Approx. 83 lbs. per pair. Aluminum Ramps. 1,500-lb. capacity per pair. 12-gauge aluminum. Approx. 55 lbs. per pair. Applications: All Makes All Models, All Makes All Models, All Makes All Models

    SKU: 01ZX7210X
    Price: Click the button below.



    May we also suggest the following products:
  • Wheel Bearings
  • IPI Fin Grip Air Ride Racks
  • Wheel Bearing & Seal Kits
  • Tubeless Knobby ATV Tires
  • Folding Curved Loading Ramps
  • Tireflys Pro Red/White/Blue Wheel Lights
  • Products short index
  • Agricultural & Excavating
  • Safety
  • Gloves
  • Material Handling
  • Hand Tools
  • Welding
  • Grounds Maintenance
  • Painting
  • Abrasives
  • CLEARANCE
  • ATV parts & Accessories
  • Shop Supplies
  • Air Compressors & hydraulics
  • Exclusive @ AutoBarn
  • Electrical
  • Van
  • Automotive
  • Miscellaneous
  • Sport Truck
  • Sport Compact
  • Auto Accessories & Gifts
  • RV & Trailer
  • SUV
  • JEEP
  • Motorcycle & Bikes
  • Truck
  • CAR tools & supply
  • Fitness Equipment
  • Construction
  • Mini-Bikes, Go Karts
  • Interior, Exterior
  • Snow & Ice Removal
  • Sporting Goods & Toys
  • Engines
  • Fuel Transfer & Lubrication
  • Tires & Wheels
  • Tarps & Covers
  • Casters
  • Towing
  • Tools & Equipment
  • Trailers

  • November-20-2008, Thursday


    See also: Contact lenses | Ferret care | Fragrance Store | Promotional products
    © auto-parts-store.biz ® co. Inc. All rights reserved. Links & partners