1/4" Carbide Nozzle W/Matching Carbide Air Jet - Abrasives - auto parts online store

All Carbide Nozzle Set - Both the Nozzle and Air jet are Carbide for superior durability. When commnon steel air jets wear the abrasive/air stream is deflected to the bottom edge of the Nozzle causing accelerated wear. This 1/4" set includes a carbide nozzle, carbide air jet and rubber washer. Air use is 15 cfm at 80 psi. The 1/4" Carbide Air Nozzle (22080A) and Air Jet (22080B) are available separately. Made in the USA.

Thick polypropylene construction is tough handles nearly any blasting job Ideal size for blasting items too large for blast cabinets Portable unit is 24 3/4in. high x 12in. diameter Requires 14 CFM at 80-100 PSI 100-lb. blast media capacity; uses glass beads, sand, plastic media, walnut shells or aluminum oxide Includes 10-ft. pick up hose, dust mask & goggles Requires 5–14 CFM @ 80–100 PSI

Manufacturer: Cyclone
SKU: 155637
Price: Click the button below.

In normal driving, friction and wear cut scratches in the metal surfaces inside every car's engine. This causes compression and power loss and increases oil consumption as cars get older. Restore Engine Restorer fills these scratches and improves the seal between piston rings and cylinder walls. This means better compression and more balanced compression across all cylinders. Independent road tests prove Restore brings back power to near original levels. This product is made for 8 cylinder engines. 19 oz.

Trim Hammer Makes Dent Repair Simple. It really is suited for fine trim repair. Use the face to remove dents in flat stainless trim and the cross pein to get tight edges and corners. The drop-forged head is hardened and tempered. Head weight 3 1/3 ounces and overall length is 4". Mounted on a hickory handle with exceptional balance and feel. Made in England.

3M Bristle Disc Does It Good. Rapidly remove paint, rust, and scale with this unique abrasive bristle brush. The flexibility of this 80 grit disc is perfect for irregular surfaces and also a great way to prep for welding, leading, and painting. Fits most angle grinders with a 5/8" x 11 threaded shaft.