Component for tractor three-point hitch system. This Stabilizer Part is built to ASAE specifications. Pin diameter: 1 1/8in Usable length: AdjustableOverall length: 6 1/8inThread diameter: 1 1/8inThread length: 3 3/8in
Manufacturer: Northern Tool and EquipmentSKU: 2501933Price: Click the button below.
Tractor and loader (Item# 188044) with backhoe implement. Multipurpose backhoe has double-acting cylinders for greater swing force and smoother operator control. Features 16in. bucket with 1.33 cu. ft. capacity, PTO pump kit and reservoir. Max. digging depth is 8ft.; max. reach is 9ft.6in.. Bucket rotates 180°. Truck ship. Standard 5ft. material bucketLift capacity to full height: 1500 lbs.Breakaway capacity: 2900 lbs.Maximum lift height (ground to lower bucket pin): 8ft. 5in.Clearance with bucket dumped: 6ft. 7in.Reach at maximum height (front of tractor to front of bucket): 16in.Maximum dump angle: 50°Bucket rollback: 18° *Digging depth: 5in.Overall height in carry position: 4ft. 9in.Hydraulic control valve requirements: two spool selective control valve required for loader and hydraulic controlled bucket cylindersLift and bucket cylinders: double actingBucket control: hydraulic twin cylindersBucket cylinder size: 2in. bore x 16 3/4in. strokeLift cylinder size: 2in. bore x 22 3/4in. strokeApproximate weight with 5ft. bucket (less mounts): 629 lbs.Raising time: 7.0 secondsLowering time: 4.0 secondsBucket dump time: 5.0 secondsBucket rollback time: 3.5 seconds*NEVER ATTEMPT FULL ROLLBACK IN RAISED POSITION WITH FULL BUCKET.
Manufacturer: NorTracSKU: 188045Price: Click the button below.
18 HP mini excavator with 2100 RPM engine, backfill blade and 16in. bucket. 9 RPM platform swing speed and a backhoe volume of nearly three cubic feet. Digging arm swings 50ø to the right and 45ø to the left. 30ø gradeability ensure performance in hard-to-reach areas. Truck ship. Model: NE-1500 Maximum Transport Length: 139.5in. (3545mm) Minimum Length/Basic Length: 101in. (2565mm)/132.5in. (3365mm) Chassis Width (outside track to outside track: 38.5in. (980mm) Height from Canopy to Ground/from Engine Hood to Ground: 80in. (2027mm)/47in. (1190mm) Maximum Height: 93in. (2360mm) Minimum Ground Clearance: 8in. (206mm) Length of Track Surface Contact: 41in. (1045mm) Individual Track Width: 9in. (230mm) Blade Height: 8.25in. (210mm) Blade Width: 38.5in. (980mm) Maximum Blade Cutting Depth: 6.7in. (170mm) Maximum Blade Lift Height: 7.9in. (201mm) Maximum Distance from Top of Blade to Ground: 16in. (411mm) Height Between Platform and Ground: 462mm Fuel Tank Capacity: 5.55 Gallons (21 Liters) Radiator Capacity: .42 Gallons (1.6 Liters) Hydraulic Circuit Capacity Tank + Piping/Tank-only: 12.4 Gallons (47 Liters)/9.7 Gallons (37 Liters) Operating Weight: 2866 lbs. (1300 kg) Travel Speed: 1.25 MPH (2 KM/H) Maximum Traction Force: 2248 lbs. (10 KN) Gradability: 30 Ground Pressure: 1.45 PSI (23 kpa) Electrical System: 12 Volt negative ground Hydraulic Pump Flow: 2 x 4.23 GPM (2 x 16 L/min) Hydraulic Pump Flow: 1.6 GPM (6 L/min) Working Equipment Circuit and Travel Circuit PSI: 2320 PSI (16 Mpa) Swing Circuit Pressure: 1305 PSI (9 Mpa) Dozer Circuit Pressure: 2175 PSI (15 Mpa) Relief Pressure: 3045 PSI (21 Mpa) Swing Motor Flow Rate: 184 ml/r Travel Motor Flow Rate: 125 ml/r Maximum Digging Depth with Crawler Level/with Crawler Tilted by Blade: 73in. (1850mm)/80in. (2040mm) Maximum Digging Height/Dumping Height: 115in. (2930mm)/79.5in. (2020mm) Maximum Reach/Reach @ Ground Level: 137in. (3480mm)/135in. (3430mm) Maximum Reach @ Maximum Digging Height: 93in. (2366mm) Maximum Digging Force @ Bucket Cylinder/@ Arm Cylinder: 2360 lbs. (10.5 Mpa)
Manufacturer: NorTracSKU: 188040Price: Click the button below.
Self skin urethane. Hardware and assembly instructions included.
Manufacturer: Northern Tool and EquipmentSKU: 17780Price: Click the button below.