PRINCE Welded Tee Cylinder - Air Compressors - auto parts online store

Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Bore: 3in. Stroke: 12in. Closed Pin Center Distance: 20in. Shaft: 1 1/2in.

Manufacturer: Prince
SKU: 908312
Price: Click the button below.

20,000 RPM at 90 PSI; 3 CFM 1/4in. inlet; 3/8in. hose size 1/4 HP; Standard duty; Model IR-301 1 year limited warranty 1/4in. Arbor size

Manufacturer: Ingersoll-Rand
SKU: 15853
Price: Click the button below.

Ideal for mobile applications. Clockwise rotation. Low power-to-weight ratio and low noise. Hydraulically balanced to reduce wear and eliminate bearing loads. 4-bolt split flanged ports. SAE 2-bolt mounting flange. Maximum at 1200 RPM: 12 Maxumum PSI: 2500 Inlet RPM: 2500 Keyed Outlet: 1 1/2in. and 1in. Mounting Shaft: 7/8in. Flange Type: B

Manufacturer: Northern Tool and Equipment
SKU: 102512
Price: Click the button below.

Toughest in the world: 625 maximum ft.-lbs. torque by hand! Spring hammer oil bath clutch for ultimate power, less vibration 4 positive power settings in forward; ultimate reverse 50-450 RPM speed; requires average of 5 CFM Comfortable elastomer grip; differential regulator 1/4in. inlet; 3/8in. minimum hose size Drives 5/8in. standard bolt

Manufacturer: Chicago-Pneumatic
SKU: 110420
Price: Click the button below.

18,000 free speed RPM 6 L/Sec, 12 CFM air consumption Rear exhaust 82 dB noise level Includes pad, sanding paper, sanding discs, connector and carry case

Manufacturer: Northern Tool and Equipment
SKU: 11252
Price: Click the button below.

Powers @ 10,000 strokes per minute 5.5 CFM air consumption 1/4in. NPTF; 3/8in. min. hose size Lock-off throttle; rear exhaust Includes 3 blades: 24T, 28T, 32T Model CP7900

Manufacturer: Chicago-Pneumatic
SKU: 157510
Price: Click the button below.

In-line tank. Designed to keep pump starts to a minimum. Increases pump life and saves energy. Outer steel shell is the air container; inner aquacell is a butyl diaphragm and polypropylene liner. This separates air from water, preventing corrosion and bacterial growth-in compliance with FDA regulations. U.S.A. Capacity: 4.4 Gallons Size (Dia.xH): 11in. x 15in. Drawdown 20/40 PSI: 1.6 Gallons Drawdown 30/50 PSI: 1.4 Gallons Size: 3/4in. Discharge Precharge: 20

Manufacturer: Northern Tool and Equipment
SKU: 108205
Price: Click the button below.