Dealer Plate Magnet - Automotive - auto parts online store

Transfer dealer license plates to vehicles for test drives. 3 magnets fixed in zinc-plated steel channel.

Manufacturer: Northern Tool and Equipment
SKU: 10499
Price: Click the button below.

12V DC power supply packs 300 Amps of instant boost power plus 225 cranking Amps in one compact unit. Reverse polarity safety warning alarm protects against reverse hook–up connections. Features keyless on/off switch, high–density rechargeable, non–spillable lead acid AGM battery (12V DC, 9 Amp–hour), 6 AWG cables with copper jaw clamps, emergency worklight, 12V accessory socket, circuit breaker and recharging port. 2–year limited warranty.

Manufacturer: Vector
SKU: 16766
Price: Click the button below.

Features an 8¬in. lowered height, so drive–on and drive–off are easy for most cars. Automatic Leveling System™ maintains consistent side–to–side leveling. Multi–position work step mounts conveniently to multiple locations on runway. Pedestal–mounted power unit can be located at any corner. Lifts to 75in. in 60 seconds. 6.5 HP, 220V single–phase motor. 242in.L x 92in.W overall. 40in.W between runways; 201in.L x 26in.W x 8¬in.H runway dimensions. 179in. max. wheelbase. Model SC9I. U.S.A. Factory shipped.

Manufacturer: Rotary
SKU: 144914
Price: Click the button below.

Patented clamp design accommodates both top and side post battery terminals. Unlike alligator clamps, these 99.9% pure copper clamps require very little hand pressure to attach to terminals. Insulated cable remains flexible in extreme weather conditions. Ergonomic handles are chemical and impact resistant. Light–duty, 10–gauge cable12–ft. length250 Amp rating

Manufacturer: Copperhead-Cables
SKU: 1628
Price: Click the button below.

UL listed magnetic sealless pump delivers 50 GPH of cleaning power. Roomy tank is 29 7/8 in. L x 20 5/8 in. W x 8 5/8 in. H, 20 gallon working capacity in tank. Requires 25 to 30 gallon drum. DRUM NOT INCLUDED. Overall dimensions: 31 7/8 in. L x 24 1/2 in. W x 15 3/4 in. closed height, 39 3/4 in. open height. UL listed power cord and switch.

Manufacturer: Northern-Industrial-Tools
SKU: 159478
Price: Click the button below.

Easily remove and install engine/transaxle assemblies of front wheel drive vehicles with this power train lift. Powered only by air supply, this train lift provides precise control and is also handy for pulling rear ends, leaf springs and more. Lifting range is 29 1/2in. to 68 1/2in.. Adjustable width between wooden support blocks is 0-29in. Load is secured with tough nylon strap. Comes with tilting plate. Lifetime warranty. Truck Ship. U.S.A.

Manufacturer: OTC
SKU: 151745
Price: Click the button below.

Our polyethylene tank has no welds or seams to fail and is guaranteed not to rust through for life. Our tank is made from one piece construction, very high puncture resistant and will not crack — even at 100 degrees below zero. This tank is perfect for any TRUCK, TRAILER or RV and is warranted for three years. U.S.A. Style Capacity For; Universal, 30 Gal. L x W x H; 28in. x 20 1/2in. x 15in.

Manufacturer: Auxiliary-Truck-Accessories
SKU: 452014
Price: Click the button below.

Use the electrode to either A) stick and pull, or B) weld studs or wiggle wire for hand pulling. Unit is battery operated for maximum portability, yet has amperage output equal to 220V shop models! Pulls hundreds of times on a single charge. Excellent shrinking capabilities. Includes control handle with shrink tip, automatic timer, 10ft. leads, dent pulling bar, nail and stud adaptors, extra electrodes and more. Truck Ship. U.S.A.

Manufacturer: A.R.C.
SKU: 165810
Price: Click the button below.