High-Speed Safety Tread - MOTORCYCLE & Bikes - auto parts online store

HIGH-SPEED TREAD MOTORCYCLE TIRE With micro-slots and deep center groove to channel water out of the way Inner tube and rim strip sold separately Special safety bead helps keep tire on rim even if blowout occurs at high speeds! Tire with micro-slots provides improved wet-weather handling and improved grip for better cornering and stability, plus ensures reduced heat buildup. Tubeless tire can be used on tube-type wheels with an inner tube and rim strip sold separately. Meets or exceeds DOT highway specifications. 2-ply nylon cord construction with 4-ply rating (load range "B"). Note: Ply figures given are ply ratings ("PR" as shown on tire), not actual ply construction. All are high-speed rated "H" (withstand speeds up to 130 MPH) and tubeless, except (A) which is tube-type and not high-speed rated. How To Order. Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. Applications: All Makes All Models

DELUXE ADJUSTABLE MIRRORS Nonglare, distortion-free flat mirror glass accurately indicates distance of objects to the rear Choose from plastic or die-cast metal housings For Honda, Kawasaki, Suzuki and Yamaha cycles with 10mm thread, screw-in mirror mounts Steel stem has special lock nut to stop vibration. Sold in pairs for left and right side. Applications: Yamaha All Models, Yamaha All Models

CUSTOM-FIT TAILLIGHT AND TURN SIGNAL VISORS Custom-styled to dress up original taillight or turn signals (front and rear) Chrome-plated metal with decorative top cutout Install easily. Extend approximately 1" beyond lens surface. Instructions included. Applications:1998-2003 Yamaha V-Star XVS650 Classic,1996-2001 Yamaha Royal Star XVZ1300,1999-2003 Yamaha Road Star XV1600,1999-2003 Yamaha Venture XVZ1300,1999-2003 Yamaha V-Star XVS1100 Classic

VENTED FULL-FACE STREET HELMET Fingertip-adjustable forehead and chin-bar vents ensure all-around ventilation to help you stay cool Refer to HELMET SIZING CHART A (see below) Clear optical-quality injection-molded Lexan? face shield is treated with long-lasting anti-fog coating A JC Whitney? exclusive! Engineered from the inside out for superior fit and riding comfort! Multiposition ratcheting shield has center tab for effortless adjustments. Ratchet assembly is concealed under screw-on side pods (pods are painted to match helmet). Designed for a quiet ride?extensive wind tunnel tests prove it! Padded and lined integral chin bar. Aerodynamic design of the outer shell plus the balanced weight throughout help prevent high-speed wobble. Combination of the one-piece specially-modified thermoplastic alloy outer shell and the one-piece polystyrene inner shell resists penetration and absorbs the brunt force of impacts. Comfort-contoured breathable foam padding (bonded to the inner shell) is lined with plush brushed perforated black microfiber nylon and features sewn-in sizing darts throughout to ensure a super fit and hours of relaxed riding. Revolutionary lining is sweat resistant?you won't feel clammy even on hotter days. Outer shell is triple sanded smooth before the premium paint is applied (for the metallics, only super-fine flakes are used to achieve the depth and brilliance). Tough high-gloss clear polyurethane coating protects the painted finish/graphics against scuffs and scratches and permits easy soap and water cleanups. Prix logo is applied over the clear-coat finish and can be removed if desired. Cushioned black nylon chin straps are double stitched to the steel double "D" ring retention system for strength. Smooth, molded black rubber base and window trim adds the perfect finishing touch. Meets or exceeds DOT standards. Replacement face shield and side pods (set of 2 with hardware) sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Applications: All Makes All Models, All Makes All Models

BRAKE AND CLUTCH LEVERS Mount with existing hardware and fit just like originals All metal levers available in polished, black or chrome-plated finish For Honda, Kawasaki and Yamaha models Applications:1988-1989 Honda Shadow Models VT800C,1987-1990 Honda Shadow Models VT1100C

CHROME-PLATED STAGGERED DUAL EXHAUSTS Add dazzle and custom staggered dual look! Restore performance, acceleration and fuel economy Bright nickel-chrome-plated seamless mufflers and complete exhaust systems available. Systems install easily with hardware and clamps. Instructions included. No drilling or welding. Chrome-plated seamless 16-gauge cold-rolled carbon steel mufflers with metal baffled core are smooth-as-glass. Approx. 20"L. Fishtail mufflers have approx. 5-3/4" seamless "tail"�no detracting seams. Most kits include 2 mufflers. Most mufflers slip on easily after removing old mufflers. All mufflers exit on right side, except Suzuki VS700, VS750, VS800 and VS1400 Intruder. NOTE: Kit for Suzuki LS650 includes only one muffler. Kit for Suzuki VS700, VS750, VS800 and VS1400 Intruder, you have a choice: 1 muffler exits on left side, one on right side, like originals (A) or both mufflers exit on right side�left-side muffler includes welded-on crossover pipe that allows right-side exit (B) . Some kits include new front and/or rear headpipes (welded-on or slip-on muffler). New headpipes mount to cylinder head using original hardware plus additional hardware included. IMPORTANT NOTES: Kits noted include chrome-plated metal heat shields with hardware and/or clamps. (1) Complete system (both mufflers have welded-on headpipes) (2) Kit with 2 slip-on mufflers (3) Tapered-tip and slash-cut bologna mufflers have 3" diam. body; fishtail mufflers have 2-1/2" diam. body (4) Complete system with 2 headpipes and 2 slip-on mufflers (5) Includes 3 heat shields (6) Includes 2 heat shields (7) Includes one heat shield (8) Kit with one slip-on muffler and one heat shield (9) Slip-on right-side muffler (left-side muffler has welded-on crossover pipe for a right-side exit) (10) Front muffler slips onto original front headpipe and rear muffler has welded-on rear headpipe (11) Will NOT fit 1981 XV920RH or 1982 XV920RJ Applications:1981-1983 Yamaha Virago XV750 Virago,1981-1983 Yamaha XV Models XV750 Virago

INSULATED LEATHER MOTORCYCLE GLOVES Black leather gloves with 6"L gauntlets that extend above wrist for added protection Slip-on nylon rain covers protect gloves against moisture Foam insulation, padded knuckles, nylon lining and adjustable wrist closures Zippered compartment for rain covers. Curved fingers and contoured shape for great fit and riding comfort. Reinforced palm and thumb. Available in sizes S (8), M (9), L (10) and XL (11). Applications: All Makes All Models

CUSTOM-FIT CHROMOLY ALLOY STEEL FRONT AND C45 CARBON STEEL REAR SPROCKETS For motorcycles (on- and off-road) and ATVs Constructed with the same number of teeth as originals to maintain original gear ratio and performance Extra-strong sprockets are tough and long lasting Precision machined by computerized metal-cutting equipment. Each sprocket is subjected to 10 stringent quality-control inspections to guarantee accurate fit and the closest match to OE tolerances. Chromoly and C45 steels are used to ensure consistent hardness throughout the entire sprocket. Heat treated for even greater strength and durability. Provide longer dependable service. Install using existing hardware. Drive chain (sold separately) should be replaced when sprockets are replaced. Replacing 1 and not all 3 will cause damage and extra wear on all parts. The original chain size and number of links required is identified for your reference. (A) The thickness of both the front and rear sprockets has been modified to allow use of the more popular 530 and 630 chains instead of the 532 and 632 stock chain. Modification does not affect original gear ratio. Applications:1987-1989 Kawasaki KX Models KX250E; F; G,1975-1979 Yamaha DT Models DT250,1978 Yamaha IT Models IT250,1981 Yamaha YZ Models YZ250,1985-1992 Yamaha YZ Models YZ250,1979 Yamaha IT Models IT400,1977 Yamaha YZ Models YZ400,1980 Yamaha IT Models IT425,1981-1982 Yamaha IT Models IT465,1980-1981 Yamaha YZ Models YZ465,1983-1984 Yamaha IT Models IT490,1982-1990 Yamaha YZ Models YZ490,1987-1988 Kawasaki KX Models KX500C1; D1,1989-1997 Kawasaki KX Models KX500E1-E9

BILLET-LOOK MIRRORS Showroom chrome-plated metal in the popular billet style for Honda, Kawasaki, Suzuki and Yamaha cycles with 10mm screw-in mirror mounts Custom-styled oval housing with distinctive recessed back Gracefully tapered stems with double cutouts Oval head is approximately 2-1/2"W x 5"H overall. Die-cast metal stems have removable threaded stem bolts. Distortion-free nonglare flat mirror glass to accurately indicate the distance of objects behind you. An extra reverse-stem bolt is included to mount right-side mirror on all Yamaha models. Sold in pairs. Applications: Honda All Models, Kawasaki All Models, Yamaha All Models, Suzuki All Models