Air Texture Gun Sprays Liquid Drywall Materials - Painting - auto parts online store

Air-powered gun professionally sprays acoustic, joint cement, texture and splatter materials. Stores nozzles and tools. Durable hopper is 13 3/4in.H x 9 1/2in.W x 11in.D; holds 1 3/4 gallon. 15 different settings. Requires 15 to 50 PSI from a 1 1/2 HP+ compressor. 1/4in. NPT. Nozzle Orifice I.D.: 1.5, 2.7, 3.5, and 3.6MM Fluid Orifice I.D.: 7/32, 1/4, 5/16, 3/8 and 7/16MM Air Connection: 1/4in. Female Gravity Feed Capacity: 7 Liters Requirements: 6 1/2 CFM Includes: Pistol Air Texture Gun Plastic Hopper 4 Spray Nozzles Circular Front Plate 1 3/8in. Tip Socket Hex Wrench

Manufacturer: Northern Tool and Equipment
SKU: 15791
Price: Click the button below.

The tough durable coating that seals and protects! Increase resale value, reduce maintenance and add a detailed look. Drop in liners can warp and trap water and contaminants that lead to bed corrosion. This two part epoxy is easy to apply with a wide brush, roller or sprayed with Undercoating Gun (16030A). Cured finish is flexible at low temperatures, offers a non-skid chip resistant finish. Adheres to firmly adhereing paint or bare metal. Degrease area to be coated and mask. One kit covers 32 square feet. Most truck beds require 2 kits. 2 or more kits are available at a discounted price.

Fast-Acting Oxisolv Rust Remover Gel - Oxisolv Super Plus Gel works great on verticle or overhead surfaces, and more. Thicker gel stays wet longer to work longer. One gallon treats 200-300 square feet.

SHIMRIN Neons (NE) are universal base coats that may simply be cleared for a final finish, or used as a base coat for Kandys or Pearls. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. Neons are designed for high visual impact on racecar, boats,cycles, etc. Note: USE WITH DISCRETION!! Neons have limited lightfastness in the sun. Neons are not recommended for overall refinishing or where long life is a requirement. Neons are usually applied over 8513ZP Shimrin White BC-26.

HotCoat Gun with Hopper System - Coat numerous parts in the same powder without the need to stop to refill the powder cup. Hopper holds about 4 times more powder than the gun cup. Push-on powder and air connectors easily push onto the gun cup lid tubes. Hose length 5' for good gun maneuverability. Hose can be cleaned with compressed air. To minimize cross contamination use a replacement hose (10298H). Includes the (10198) HotCoat Powder Coating System.