Billet Window Cranks - SPORT TRUCK - auto parts online store

BILLET WINDOW CRANKS Aircraft-grade 6061-T6 billet aluminum Give your sport truck interior an upgraded look when used with other billet interior accessories from APC�! Easy to install�replace original perfectly, using existing hardware Sold in pairs. Applications: All Makes All Models

HALOGEN HEADLAMP CONVERSION KIT Updates vehicle's OE sealed beam headlights to popular, brighter HID-style lighting Replaces OEM or aftermarket sealed beams or halogen lamps New clear lenses plus free-form reflectors for the latest look plus improved illumination (2 to 4 times brighter than sealed beams) For all vehicles. Uses H-4 or 9003 halogen bulbs (not included). SAE approved. Applications: All Makes All Models, All Makes All Models

4" SUSPENSION LIFT KIT Eliminates a sagging front end Combines spindle and one-piece sub-frame to reduce number of brackets and dramatically cut installation time Allows use of 33" tires Kit includes all necessary parts to achieve the lift, excluding shocks. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1997-2001 Ford F-Series Pickup F150 4WD with 5.4L

PERFORMANCE BOOSTER Designed to burn fuel cleaner, faster and more completely for greater power and fuel economy Increase gas mileage 7% to 24%, gain a 4- to 13-HP increase! Stainless steel booster installs easily inside the air intake hose of electronically fuel-injected vehicles Creates a swirling motion forcing air around corners and bends and through intakes Since air is the main component in the combustion process, this mini whirlwind results in the best fuel atomization possible. Tests prove it! The Tornado� increases gas mileage from 7% to 24% (figures confirmed by road tests performed by an emission lab licensed by EPA/CARB). Dyno testing shows a big boost in horsepower�4-HP to 13-HP gain. Maintenance free�no moving parts to wear out. Manufacturer's lifetime warranty. To order proper size For Carburetor/EFI Type: (1) remove air inlet hose located between throttle body and air filter box; (2) measure inside diameter (ID) of hose; match measurement with corresponding ID given. For Carburetor/TBI Type: (1) lift top off to expose the air filter element; (2) line up a straight edge along top of air cleaner element at center and measure height at point "A", 3-1/2" from center stud. "A" is distance from air cleaner base to bottom of straight edge. NOTE: Most '87-97 Ford cars, trucks and vans with 4.9L, 5.0L, 5.8L and 7.5L engines have 2 air intake hoses; therefore, 2 Tornado� boosters are required for these applications only. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

HOSE CLAMP COVER KITS Polished and deep anodized aircraft aluminum in a variety of colors Kit covers hose ends and hose clamps for that "finished" look. Choice of hex-shaped or round covers. Hose clamps not included. Kit includes the following clamp covers: eight 3/8"ID for vacuum lines (consists of color-matched, heat-shrinkable tubing); four 11/16"ID for fuel lines and PVC line; two 1"ID for 5/8"ID heater hose; two 1-1/16"ID for 3/4"ID heater hose; two 1-3/4"ID for small radiator hose; two 1-7/8"ID for larger radiator hose. Applications: All Makes All Models

BLACK NEON TUBES Whites and fluorescents come alive! Long-lasting neon is sealed in a water-proof, high-impact Lexan? tube Install anywhere?inside or out! Mini 6", and 9", tubes have 3-ft. cord that plugs into a separate power transformer (included). 10", 15", and 20", tubes have built-in transformer. Transformer plugs into lighter socket or wires to 12-volt system (only 2 wires to hook up). Include brackets, hardware and instructions. Limited lifetime warranty. NOTE: Check local laws before ordering. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

BASS TUBES? SUBWOOFER Bass Tubes? enclosure (PVC composite material) is lightweight yet more rigid than traditional enclosures to withstand the much higher pressure levels Designed to eliminate the acoustic standing waves that can harm sound quality and output Test-proven efficiency! A Bazooka? with a single 10" woofer outperforms a conventional enclosure with four 12" woofers (139.7 dB vs. 136 dB) A conventional sealed box with the same size woofer requires nearly 8 times the power to produce the same SPL (sound pressure level) as Bazooka?! High-performance woofer includes UV-resistant coated paper pulp cone with oversized cone reinforcement cap, twin-layer compressed foam surround, stamped steel basket, ceramic ferrite magnet assembly, extended pole and high-power/high-temperature 4-layer voice coil. The entire area of cone (both front and back) is used for sound production?ordinary sealed enclosures use only half of cone area, decreasing sound pressure level. 4-8 Ohm impedance. Applications: All Makes All Models Subwoofer; 6.5" Woofer Size; 100 Watts Maximum Power per Channel; 1" Voice Coil; 20-oz. Magnet; 100 dB Efficiency; 39-1500 Hz Frequency Response; 18" x 6.75" x 8"; 11 lbs.